How to Successfully Root Wiko U Feel and Wiko U lite

This post is sourced from HOVATEK, you can get the original post Here. The Wiko U Feel and Wiko U Feel Lite are Mediatek MT6735 chipset (SoC) powered Android phones which ship with Android 6.0 (Marshmallow), which makes it quite impossible for rooting apks at the moment. Here are the spec of Wiko U Feel and Wiko U Lite. This guide will teach you how to easily root either of these Wiko devices.

How to Root Wiko U Feel or Wiko U Feel Lite Android phone

Also See: How To Root Tecno Phantom Phones

Requirements:
1. A PC
2. A working USB cable

Follow the below guide carefully

• Download TWRP for Wiko U Feel (Marshmallow) ported by Team Hovatek here 
• Download TWRP for Wiko U Feel Lite (Marshmallow) ported by Team Hovatek here 
• Setup ADB and Fastboot on the PC using the guide here 
• Extract and copy the TWRP recovery.img into the same folder as the fastboot.exe and adb.exe 
• Unlock the Bootloader of the Wiko U Feel or Wiko U Feel Lite using the guide here 
• Download SuperSU 2.76.zip here 
• Copy SuperSU.zip to both the phone’s SD card and internal storage 
• Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide) 
• When the phone enters Fastboot, flash the TWRP recovery image to the phone by typing the command below then pressing Enter 

 fastboot flash recovery recovery.img

• Once recovery is flashed in fastboot, hold the Volume up + Power button and don’t release till the phone reboots. When it does, select Recovery from the list 
• In TWRP, if you get a prompt asking you to swipe to allow modification of the System partition, tap KEEP READ ONLY 
• If TWRP offers to root the phone, select NO In TWRP recovery, tap Install 
• Navigate to the location of the SuperSU2.76.zip and select it 
• Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete 

Reboot the phone normally Confirm Root by installing and running Root Checker